HYDRAULIC LIFTER MAINTENANCE.

TM5-4210-224-14&P

6-5. ROCKER ARM, SHAFT AND PUSH ROD MAINTENANCE. (Continued)

NOTE

This measurement can be estimated by

aligning the torsional damper mark with

the first lower, water pump bolt. This

procedure will position the engine so no

valves are close to a piston crown.

f. Rotate the engine counterclockwise 3-1/2 inches

(88 mm), measured at the torsional damper.

g. Install both rocker arm shaft bolts (1) snug on

the shaft and alternately, torque to 40 ft-lbs (55

N.m).

h. Install rocker arm cover (paragraph 4-112).

6-6.

HYDRAULIC LIFTER MAINTENANCE.

This task covers:

a. Removal

b. Inspection

c. Installation

Equipment

Condition

INITIAL SETUP

Para.

Condition Description

Tools

Rocker Arm Cover Removed

General Mechanics Tool Kit

Rocker Arms Removed

Hydraulic Lifter Remover (J-29834)

General Safety Instructions

Materials/Parts

Engine OFF

Lubricant (Appendix D, Item 22)

Transmission in (N) neutral.

Hydraulic Lifter (5234530)

Parking brake and micro-brakelock set.

6-6