|
|
TM 5-4210-224-14 & P
4-235. WHEEL HUB BOLT REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
Hub/Rotor Support
Para.
Condition Description
(J-9746-02)
Tire and Wheel Assembly
General Mechanics Tool Kit
Removed
Hub/Rotor Assembly Removed
Materials/Parts
General Safety Instructions
Hub Bolt (355815)
Engine OFF
Transmission in (N) neutral.
Parking brake and micro-brakelock set
REMOVAL
CAUTION
Do not damage the wheel
mounting surface on the hub/rotor
flange.
a. Support the hub/rotor using the hub/rotor
support to prevent damage to the rotor face.
b. Remove the wheel hub bolts (1) using a press
and the support.
INSTALLATION
a. Install new serrated bolt (1) into the hole in the
c. Tighten the nut (2) until the bolt fully seats into
hub/rotor (3).
the hub/ rotor (3).
b. Place four washers onto the bolt, then fasten a
d. Remove the nut (2) and washers.
nut (2) onto the bolt until the nut bottoms on the
washers.
4-329
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |