 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-224-14&P
4-153. HOOD RELEASE CABLE REPLACEMENT.
REMOVAL
a.
Remove the cable (1) from the radiator
support (2) and the wheelhouse retaining
strap (3).
b.
Remove the grommet (4) from the cowl (5).
c.
Cut the grommet down to the cable casing
on the engine side of the cowl and push the
cable and grommet through the cowl.
d.
Remove the two bolts (6) attaching the
cable handle (7) to the air vent bezel (8)
underneath the dash.
b.
Insert the cable (1) into the grommet (4) and
push the grommet into the cowl (5) leaving
e.
Remove the cable (1) from the vehicle.
sufficient cable exposed to attach the cable
release to the bracket.
INSTALLATION
c.
Install the cable bolts (6) through the cable
NOTE
bracket and into the air vent bezel (8)
underneath the dash.
Do not kink the cable.
d.
Install the cable (1) through the wheel house
a.
Install the new cable by pushing the cable
retaining strap (3) and the radiator support
(1) through the drivers side of the cowl (5).
(2).
e.
Install the cable to the primary latch
4-154. HOOD ORNAMENT REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Mechanics Tool Kit
General Safety Instructions
Engine OFF.
Materials/Parts
Transmission in (N) neutral.
Ornament (14039999)
Parking brake and micro-brakelock set.
REMOVAL
b.
Remove the hood ornament (2) and gasket
a.
Raise the hood and remove the hood
(3) from the hood (4).
ornament nuts (1).
4-208
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals