INSTALLATION - TM-5-4210-224-14-P0194

TM 5-4210-224-14&P

4-63. WATER TANK LEVEL SENDER REPLACEMENT. (Continued)

INSTALLATION

a. Install gasket (8) and water tank level sending

unit (7) on water tank cover and secure with four

phillips screws (5) and hex nuts (6).

WARNING

When lifting an object make sure

the hoist and sling are fastened

securely. Be sure the item being

lifted does not exceed the capacity

of the lifting device.

b. Install tank cover (3) using a hoist.

e. Install hose bed floor (paragraph 4-59).

c. Secure tank cover (3) to tank (4) using 46

washers (2) and hex nuts (1).

f. Install fill tower bracket (paragraph 4-58).

d. Reconnect water tank sending unit to water

g. Reconnect battery cables.

level gauge connector.

4-64. TANK PIPING REPLACEMENT.

This task covers:

a. Removal

b. Installation

Equipment Condition

INITIAL SETUP:

Para. Condition Description

Tools

4-58 Fill Tower Bracket Removed

General Mechanics Tool Kit

4-59 Hose Bed Floor Removed

Hoist

4-63 Water Tank Level Sender

Removed

Materials/Parts

Tank Piping (120-90003)

General Safety Instructions

Engine OFF

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

Batteries disconnected

Fire Pump and piping drained.

4-99