 |
|||
|
|
|||
|
Page Title:
Table 4-2. Organizational Preventative Maintenance Checks and Services (PMCS) - continued |
|
||
| ||||||||||
|
|
 TM 5-4210-224-14&P
Table 4-2. Organizational Preventative Maintenance
Checks and Services (PMCS) (Continued)
W - Weekly
Q - QUARTERLY
A - ANNUALLY
M - Monthly
S- SEMI ANNUALLY
INTERVAL
ITEM
ITEM TO BE
NO.
INSPECTED
PROCEDURE
WMQ S A
38.
Front Disc
Visually inspect front disc brakes for cracks, scores,
q
Brakes
spotting, or other structural damage to the caliper's.
Inspect condition of brake lining. Replace front disc
brakes or brake lining if defective or worn parts are
found.
39.
Rear Drum
Visually inspect rear drum brakes for cracks, scores,
q
Brakes
deep grooves, and out-of-round. Inspect inside of
drums for smoothness heat checking, and spotting. Inspect
condition of brake lining. Replace rear brake drums or
brake lining if defective or worn parts are found.
STEERING ASSEMBLY
40.
Steering System
Visually inspect pitman arm, tie rods, connecting
q
rods, and steering shock absorber for corrosion,
cracks, bends, dents or other structural damage.
Replace any damaged parts.
POWER STEERING SYSTEM
41.
Power Steering
Visually inspect power steering gear, pump, and piping
q
System for signs of leakage, corrosion, and other structural
damage. Inspect power steering reservoir for proper
level.
Add fluid if necessary. Inspect power steering
pump belt for evidence of cracks, breaks, wear, and
proper tension. Replace any defective or damaged parts.
FRONT SUSPENSION ASSEMBLY
42.
Front Suspension
Visually inspect U-bolts, shock absorbers, leaf springs
q
hangers, shackles, and shock absorber brackets for
pitting, nicks, looseness or other structural damage.
Inspect for loose or missing attaching hardware. Replace
any defective or damaged parts.
44.
Wheel Hub/Rotor
Visually inspect dust cap, brake rotor, and hub for corrosion,
q
cracks, pitting, looseness, or other structural damage.
Inspect screws and studs for distortion, damaged heads o
r
screws. Replace any damaged or defective parts.
REAR SUSPENSION ASSEMBLY
45.
Rear Suspension
Visually inspect stabilizer bar, U-bolts, shock absorbers,
q
brackets, leaf springs, spring hangers and shackles for
corrosion, cracks, pitting, distortion, or other structural
distortion. Inspect all attaching hardware for cracks, loose-
ness, or damaged threads. Replace any defective or damaged
parts.
REAR AXLE ASSEMBLY
46.
Wheel Bearings
Visually inspect bearing caps for damage or distortion. In-
q
spect bearing for cracks, corrosion, or other structural
damage. Replace wheel bearing seals and any other defective
parts.
47.
Hub and Drum
Visually inspect dust cap, brake drum, and hub for corrosion,
q
cracks, pitting, looseness, or other structural damage. In-
spect screws and studs for distortion or damaged threads.
Replace any damaged or defective parts.
4-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals