|
| |
TM 5-4210-220-34
2-11.
HOSE BODY - Continued
COMPARTMENT
DIMENSIONS
NUMBERS
Qty.
A - in. (cm)
B - in. (cm)
1
2
55 75 (141.6)
13.75 (34.9)
2
4
29.75 (75.6)
21 75 (55.2)
3
1
29.75 (75.6)
9 75 (24.7)
4
4
25 75 (65.4)
21 75 (55.2)
5
2
25.75 (65.4)
13.75 (34.9)
g.
Rear Light Bracket Repair
(1) Remove rear beacon (1) from rear light
bracket (2) (see TM 5-4210-220-12).
(2) Remove locknut (4) and capscrew (3) that
retain rear light bracket (2) to stanchion (5).
(3) Examine
stanchion
(5)
for
bends
or
oversized mounting holes. Replace as
necessary.
(4) Repair dented or twisted rear light bracket
(2) using basic body repair tools. Replace
rear light bracket if damage is excessive.
(5) To install rear light bracket, aline mounting
holes as shown.
(6) Install capscrew (3) and locknut (4) and
tighten to 7 ft lb (10 Nm).
(7) Install rear beacon (1) as detailed in TM 5-
4210-220-12.
h
Grab Rail Repair
NOTE
There are two grab rails, one mounted to
top of dividers, and one mounted on rear
panel.
To remove top rail refer to steps 1 thru 6; to remove
lower grab rail, refer to steps 7 thru 12.
(1) Remove
all
auxiliary
equipment
from
compartment box (3).
(2)
Remove
grab
rail
(2)
from
between
compartment box (3) and upper panel (4)
by removing two capscrews (1). Gain
access to left hand capscrew from inside
compartment box.
2-49
|
