|
| |
TM 5-4210-220-34
3-8.
ENGINE - Continued
(15)
Check the end thrust between the thrust washer and the thrust shoulder of each camshaft (6 and 7). End
thrust for new parts should be 0.004 to 0.012 in. (0.10 to 0.30 mm). End thrust for used parts should be
0.018 in. (0.46 mm).
(16)
Check the backlash between all mating gears. Backlash for new parts should be 0.002 to 0-008 In (0.05 to
0.20 mm). Backlash for used parts should be 0.010 in. (0.25 mm) maximum.
(17)
Install the front balance weight cover, see para. 3-8.5.
(18)
Install the water pump, see para. 2-19.9
(19)
Install the flywheel housing, see para. 3-8.6.
(20)
Install both cylinder heads, see para. 2-19.8
(21)
Install the blower drive support, see para. 3-8.7.
(22)
Install the blower, see para. 3-8.3.
(23)
Remove the engine block from the engine stand and adapter and install in truck as detailed in para. 3-8.1.
3-161
|
