|
| |
TM 5-4210-220-34
3-7.
TRANSMISSION - Continued
(46) Install 4-5 shift valve (62), smaller end first, modulator valve (61), smaller end first, spring (60), valve stop
(59) and adjusting ring (58), flat side first, into bore of valve body (1).
(47) Aline the pin hole in valve stop (60) with the pin holes in the valve body. Compress the spring, and install
retainer pin (68) into the valve body to retain adjusting ring (59). Be sure the adjusting ring is In the same
position as it was before removal.
(48) Install 3-4 shift valve (57), smaller diameter first, modulator valve (56), smaller diameter first, spring (55),
valve stop (54) and adjusting ring (53), flat side first, into bore of valve body (1).
(49) Aline the pin hole in valve stop (54) with the pin holes in the valve body. Compress the spring, and install
retainer pin (63) into the valve body to retain adjusting ring (53). Be sure the adjusting ring is in the same
position as it was before removal.
(50) Install 1-2 shift (48), 1-2 modulator valve (49), spring (50), valve stop (51), and adjusting ring (52) into bore of
valve body (1).
(51) Aline the pin hole in valve stop (51) with the pin holes in the valve body. Compress the spring and install
retainer pin (47) into the valve body to retain adjusting ring (52). Be sure the adjusting ring is in the same
position as it was before removal.
(52) Manual selector valve (37) will be installed later during assembly into bore.
3-30
|
