|
| |
TM 5-4210-220-34
3-7.
TRANSMISSION - Continued
NOTE
The components in each bore are spring-loaded and must be compressed while removing the retainer
pins.
(21) Remove retainer pin (20), valve stop (27), spring (26), and valve (25).
(22) Remove retainer pin (19). spring spacer (30), spring (29) and valve (28).
(23) Remove retainer pin (36), spring (34), stop (35), and valve (33).
NOTE
Before removing pins (41, 47, 63 and 67), make a note or sketch that shows the position of the adjusting
rings (45, 52, 53, and 58) with respect to their retaining pins. If the value body is reassembled with the
same springs, and the adjusting rings are in their original positions, the original calibration of the valve
body is maintained.
(24) Remove retainer pin (41), adjusting ring (45), spring washer (46), valve stop (44), spring (43), and valve (42).
(25) Remove retainer pin (47), adjusting ring (52), valve stop (51), spring (50), modulated valve (49), and 1-2 shift
valve (48).
(26) Remove retainer pin (63), adjusting ring (53), spring (55), valve stop (54), and valves (56 and 57).
(27) Remove retainer pin (67), adjusting ring (58), spring (60), valve stop (59), and valves (61 and 62).
(28) Remove retainer pin (71), valve stop (64), spring (65), and valve (66).
3-27
|
