|
| |
TM 5-4210-220-12
4-18. PUMP, PIPING, AND VALVES - Continued
4-18.17 Bumper Turret - Continued
a.
Head Repair.
NOTE
This task can be completed with the turret mounted on the truck.
(1)
Remove nut (1) and capscrew (2) that retains the water sleeve link (3) to the water sleeve (11).
(2)
Remove capscrews (4), and lower cable (10) and cable mounting plate (5) from head (6).
(3)
Remove jam nut (7), seal washer (8), and the bearing screw (9) from the head (6).
(4)
Remove drain valve (12) from end cap (13).
(5)
Remove end cap retaining ring (14) and pull end cap (13) and O-ring (15) from body (17). Remove
O- ring and discard.
4-282
|
