|
| |
TM 5-4210-218-13&P
d.
Clean any remaining antiseize tape from nipple, Halon cylinder adapter, and gauge thread.
4-18.4.2 Installation.
a.
Check new pipe tee (2) for defects.
b.
Wrap one layer of antiseize tape (item 3, Section II, Appendix F) around nipple, Halon cylinder adapter, and
gauge threads.
c.
Holding nipple, screw pipe tee (2) onto nipple and tighten securely.
d.
Holding pipe tee (2) securely, screw Halon cylinder adapter into pipe tee and tighten.
e.
Holding pipe tee (2) securely, screw gauge into pipe tee and tighten.
f.
Install Halon cylinder adapter assembly on Halon cylinder and test for leaks using leak detector (Appendix
E).
4-25
|
