Section III. CONTROLS AND INSTRUMENTS

Section II. MOVEMENT TO A NEW WORKSITE

Drain the water tank and foam tank.

11. Dismantling for Movement

(para 20).

The fire truck requires no (disassembly

other than the safe and -proper storage of hoses,

Lock the hose reel assemblies (para. 19).

ladders, hose connections, adapters, and accessories

for movement to a new worksite.

12. Reinstallation After Movement

Disconnect the battery cables and drain the

Fill the water tank and foam tank (para.

fuel (TI 9-2320-235-10) in the event the fire truck is

moved by some means other than its own power.

Service the carriers' fuel system (TM 9-

Caution: Do not exceed 20 mph on

2320-235-10).

good hard surface road or 10 mph on

Connect the battery cables to the batteries

secondary roads or across country

(TM 9-2320-235-10).

when towing the fire truck.

Section III. CONTROLS AND INSTRUMENTS

14. Controls and Instruments

13. General

The purpose, location, and use of the controls and

This section describes, locates, illustrates, and

normal readings of the instruments and gages are

furnishes tile operator,

crew, or driver sufficient

illustrated on figure 6. Refer to TM 9-2320-235-10 for

information about the various (controls and instruments

chassis and engine controls and instruments.

for p)roper operation of the fire truck.

TAGO 6839A