|
| |
TM 10-4210-235-13
Figure 4-15. Hose Reel Assembly
b.
Disassembly (See figure 4-16 )
(1)
Disconnect two union tailpieces (1) from distributor (2).
(2)
Remove setscrew (3), lubrication fitting (4), and 30 ball bearings (5).
(3)
Carefully separate elbow (6) and union tailpiece (1).
(4)
Remove preformed packing (7) and (8). Discard preformed packing.
(5)
Remove four nuts (9), lock washers (10), eight flat washers (11), and four screws (12). Using sand paper,
carefully remove paint from distributor (2) and slip two bearings (13) off Discard lock washers
(6)
Remove eight screws (14), and gear (15)
(7)
Remove eight screws (16), 12 lock nuts (17), two discs (18), six spacers (19), distributor (2) flange (20),
and spool (21). Discard lock nuts
c.
Repair
Repairs are limited to replacement of individual components.
4-39
|
