|
| |
TM 10-4210-235-13
4-19 HOSE REEL ASSEMBLY REPAIR AND REPLACEMENT
This task covers:
a.
Removal
b.
Disassembly
c.
Repair
d.
Assembly
e.
Installation
INITIAL SETUP:
Tools
Materials/Parts
General Mechanics Tool Kit, Appendix B, Section III,
Lock Washers (4) for trailer mounted extinguisher
Item 1
assembly or (8) for auxiliary mobile hose reel cart,
Appendix H, item 2
Equipment Condition
Lock Nuts (12), Appendix H, item 13
Remove installation tool from trailer mounted hose reel
(para 4-13).
Preformed Packing (2), Appendix H, item 19
Remove gage case from trailer mounted hose reel (para
Preformed Packing (2), Appendix H, item 20
4-13)
Lock Washers (4), Appendix H, item 2
Remove hand crank (para 4-13).
Antisieze Tape, Appendix E, Section II, item 4
Remove nozzles and bracket (para 4-14).
Grease, Appendix E, Section II, item 11
Remove fire hose (para 4-17).
Sand Paper (100 Grit), Appendix E, Section II, item 13
Remove hose roller assembly from trailer mounted hose
reel (para 4-18).
Personnel Required
Remove nozzle bracket (para 4-14)
Two
Remove discharge hoses (para 4-15 and 4-31).
General Safety Instructions
Remove rewind brake assembly (para 4-20)
WARNING
Lifting the hose reel assembly by yourself can result in
serious personal injury.
a.
Removal (See figure 4-15.)
(1)
Remove four nuts (1), lock washers (2), screws (3), and flat washers (4) for trailer mounted extinguisher
assembly. Discard lock washers.
(2)
Remove two nuts (5), flat washers (6), and J-bolts (7) for auxiliary mobile hose reel cart.
(3)
Remove eight nuts (8), lock washers (9), and four U-bolts (10) for auxiliary mobile hose reel cart. Discard
lock washers.
WARNING
Lifting the hose reel assembly by yourself can result in serious personal injury.
(4)
Using two personnel, carefully remove frame (11) from unit or cart as applicable.
4-38
|
