Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Injector Controls
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 5-4210-220-34 2-19. ENGINE - Continued 2-19.6 Injector Controls. This task covers: a. Adjustment b. Removal c. Installation d. Repair TOOLS Both Engine Covers Removed Shop Equipment, Automotive (see TM 5-4210-220-12) Maintenance and Repair, Both Rocker Covers Removed (see para.  2-19.3) NSN 4910-00-754-0705 J23190 Injector Rack Gage MATERIALS/PARTS J25560 Injector Rack Gage 17, Appendix B Engine Oil J25558 Throttle Delay Pin Gage 5149510 Rocker Cover Gasket EQUIPMENT CONDITION Main Engine Shutdown (see TM 5-4210-220-12) APU Shutdown (TM 5-4210-220-12) Batteries Disconnected (see TM 5-4210-220-12) ADJUSTMENT Before  adjusting  injector  controls,  be  sure  exhaust  valves  have correct  clearance,  injectors  have  been  timed,  and  governor  gap has been set up. (1)     Disconnect  foot  throttle   and   pump   governor   from main engine governor as detailed in para.  2-19.12. (2)     Turn  the  governor  idle  speed  adjusting  screw  (1) until  1/2  In.    (13  mm)  of  threads  project  from  the locknut   when   the   nut   is   against   the   high   speed plunger. (3)     Back out the buffer screw about 5/8 in.  (16 mm). (4)     Loosen the throttle delay U-bolt (1) on the right bank until the fuel rack rotates freely. (5)     Remove the split pin (2) and clevis pin (3) from the right hand fuel rod (4) and injector control tube lever (5). (6)     Loosen all the rack control lever adjusting screws (7) and locknuts (6). (7)     Move the speed control lever to the maximum speed position with light finger pressure. (8)     Tighten the adjusting screw (8) of No.  1 cylinder left bank (No.  1 L) until the injector rack clevis is seen to roll up, or the effort to turn the screwdriver increases Tighten the screw another 1/8 turn and lock in place with the locknut. 2-194

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business