5-31. RADIATOR - Continued
Tag and remove two wires (18) from low
water sensor (19).
Loosen two radiator clamps (20) and
remove two 2-1/2 inch upper radiator
hoses (21) from radiator.
(10) Loosen clamp (22) and remove 3/8 inch
by-pass hose (23) from radiator.
Loosen clamp (24) and remove 1 inch
by-pass hose (25) from radiator.
Remove two hex head screws (26) and
stabilizer rod upper ends (28) from sides
Loosen two stabilizer rod lower ends to
pivot stabilizer rods clear of radiator.
Serious injury could occur if heavy equipment is moved/lifted
without sufficient personnel to do the job. Use proper physical
lifting procedures or use a suitable lifting device or dolly. Wear
safety shoes, gloves and other suitable protective clothing. Area
should be clear of other personnel. Serious injury or death can
result from falling objects.
Attach suitable lifting device to top of radiator.
Loosen clamp (32) and disconnect 3-inch lower hose (33) from radiator.
Tag and remove two transmission coolant hoses (34) and dran fluid into suitable container.
Remove eight hex head screws (35), and eight lockwashers (36).