 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-175. OUTRIGGER WARNING LIGHTS
THIS TASK COVERS:
a.
Removal/Disassembly Outside Light
b.
Installation/Assembly Outside Light
c.
Removal/Disassembly Inside Light
d.
Installation/Assembly Inside Light
e.
Follow-on Maintenance.
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
MATERIALS/PARTS REQUIRED
Outriggers Extended (see para 2-14.)
Butt Splice (Item 27, Appendix E)
a. Removal/Disassembly Outside Light
(1) Remove three screws (1) to remove
lens (2) and gasket (3) to gain access to
bulb (4). Remove bulb.
(2) To remove fixture (5) remove three
screws (6) and cut wires (7). Tag wires.
b. Installation/Assembly Outside Light
(1) Install fixture (5) (if removed) by connecting wires (7) with butt splice (Item 27, Appendix E) and
securing fixture (5) with three screws (6).
(2) Install bulb (4).
(3) Install lens (2) and gasket (3) with three screws (1).
c.
Removal/Disassembly Inside Light
(1) Remove three screws (1) on either side of fixture (2) to remove lens (3) and gaskets (4) to gain
access to bulbs (5). Remove bulbs.
(2) To remove fixture (2) remove nut (6) and cut wires (7). Tag wires for assembly.
4-461
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals