TRANSMISSION REPAIR (Continued).
(g) If oil filter (234) and sealring (235) were
removed, install new ones. Install the new
filter and sealring closed end of the cone
first into the center support. Be sure the
sealring on the filter seats against the
shoulder in the support.
Center support sealrings (249) must not
be installed onto the support hub until
final assembly of the transmission.
h. Gear unit and main shaft assembly repair.
(a) Remove the thrust washer (252) from the
front of the gear unit.
(b) Remove the front sun gear (253). Remove
the thrust washer (254) from the gear.
(c) Lift off the front planetary carrier assembly
(255). Remove the thrustwasher (256)
from the assembly.
Bearing assembly (257) and bearing
race (258) may come out when sun gear
shaft assembly (259) is removed.
assembly (259). If parts replacement is
necessary, remove bushings (260) and
spring pins (261) from shaft (262).
(e) Remove bearing assembly (257) and