|
| |
TM5-4210-299-14&P
4-141. HOOD LATCH REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SET-UP
Tools
Materials/Parts
General Mechanics Tool Kit
Sandpaper, Fine (Appendix D, Item 46)
Rubber Lubricant (Appendix D, Item 24)
Curbside Glass (20264743)
Streetside Glass (20264744)
General Safety Instructions
CAUTION: Always wear heavy gloves when
handling glass to minimize the risk of injury.
Equipment Condition
Para. Condition Description
4-145 Door Glass Removed
4-143 Door Glass Seal Removed
REMOVAL
a. At the outside of door (1) remove two pan head
mounting screws (2) one from top and one
from front edge.
b. From inside of door (1) remove two hex head
bolts (2) and detach vent glass (3) and front run
channel from door (1).
c. Lift out vent glass (3) and front run channel as an
assembly through window frame.
INSTALLATION
a. Install vent glass (3) and front run channel as an
assembly.
b. Install two bolts (2) on inside of door into vent glass (3).
c. At the outside edge of the door (1), install two pan head
screws (2).
d. Install door glass seal (paragraph 4-143).
e. Install door glass (paragraph 4-145).
4-152
|
