|
| |
TM5-4210-299-14&P
4-142. DOOR GLASS REGULATOR REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SET-UP
Tools
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral
Materials/Parts
Parking brake set.
Lubriplate (Appendix D, Item 28)
Door Glass Regulator Curbside (449767C93)
Door Glass Regulator Streetside (449766C93)
REMOVAL
a. Remove window regulator handle (1) and door
remote control handle (2) by removing socket head
screws from handles.
b. Remove gasket (3) and door trim panel (4).
c. Lower glass (5) to bottom of door and remove the two
glass fastener screws (6) and regulator lever (7) from
window guide (8).
d. Remove window guide (8) by sliding it from regulator
lever (7).
e. Push door glass (5) up in window frame and secure
glass to top of door with tape.
f. Remove the four retaining screws which hold regulator
assembly (7) in door.
g. Push regulator shaft through hole in door inner panel
and remove regulator assembly (7) through access
opening.
INSTALLATION
a. Install regulator assembly (7) and secure with four
retaining screws.
b. Install window guide (8) by sliding it into regulator lever (7)
c. Untape glass (5) and lower glass (5) to bottom of door and
attach two glass fastener screws(6) and regulator lever (7)
to window guide (8).
d. Install door trim panel (4) and gasket (3).
e. Install remote control handle (2) and window regulator handle
(1) using socket head screws.
4-153
|
