Quantcast INSTALLATION - TM-5-4210-224-14-P0484

 

Click here to make tpub.com your Home Page

Page Title: INSTALLATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
ENGINE MOUNTING REPLACEMENT.
Up
TM-5-4210-224-14-P 250 6PM Mini-Pumper Firefighting Truck Model No.:CM-KFT-3 Manual
Next
Section V. MAINTENANCE OF CAB ASSEMBLY, LIGHTS, SWITCHES, GAUGES, CONTROLS, AND INDICATORS
TM5-4210-224-14& P
5-11.
ENGINE MOUNTING REPLACEMENT. (Continued)
b. Rear Engine Mounting Assembly.
(4) Lower the engine until the through-bolts
can be inserted.
(1) Support the rear of the engine with a
suitable jack to relieve the weight on the
(5) Install the through-bolts (1) and nuts (2)
rear mountings.
and torque the bolt to 85 ft-lbs (115 N-m)
or nuts to 55 ft-lbs (75 N-m).
(2) Remove the mounting-to-crossmember
nuts (6) and washers (7).
(6) Remove the support and reconnect the
battery cables.
(3) Remove  the  mounting-to-transmission
bolts (8) and washers (9).
b. Rear Engine Mounting Assembly.
(4) Raise the rear of the engine only enough
(1) Install the mounting (10).
to permit removal of the mounting (10).
(2) Lower the rear of the engine.
(5) Remove the mounting (10).
(3) Install the mounting-to-t nsmission bolts
ra
INSTALLATION
(8) and washers (9).
(4) Torque the bolts to 40 ft-lbs (54 N-m).
a. Front Engine Mounting Assembly.
(5) Install the mounting-to-crossmember nuts
NOTE
(6) and washers (7).
The through-bolt must be inserted from
(6) Torque the nuts to 36 ft-lbs (48 N-m).
the rear of the right side mounting
before the mounting is installed in the
(7) Remove the support and reconnect the
vehicle.
battery cables.
(1) Install the engine mounting assembly (5)
to the vehicle.
(2) Install the mounting assembly bolts (3)
and washers (4).
(3) Torque the bolts 3) to 36 ft-lbs (48 N.m).
(
NOTE
Be sure there is a 1 inch (25 mm)
clearance  between  the  throughbolt
head and mounting assembly.
5-27

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +