4-213. BRAKE PEDAL REPLACEMENT. (Continued)
c. Install nut (7) and torque to 25 ft-lbs (34 N-m).
a. Install new bushings (11) and spacer (12) in
d. Install return spring (6).
e. Install washer (4) and pin (3) to pushrod (5) and
brake pedal (9) arm.
Pivot bolt (8) must be installed in
the direction shown in order to
f. Install washer (2) and retainer (1).
clear spring return.
b. Position brake pedal (9) and clutch pedal (10)
assembly within bracket and insert pivot bolt (8)
operation of the stoplamp switch.
through support and pedal arm assemblies.
Adjust if necessary (paragraph 4-
4-214. PARKING BRAKE REPLACEMENT
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Position the vehicle on a level
surface and set the gear in the
"low" or "reverse" position before
working on the parking brake. Be
sure to block wheels.
Parking Brake (362280)
a. Release the parking brake.
b. Disconnect nuts (1) from bolts in firewall.
c. Disconnect the release rod (3) from the brake
d. Remove bolt (2) attaching parking brake
assembly to the kick panel.