4-176. TRIM PANEL REPLACEMENT. (Continued)
d. Align remaining retainers with panel slots and
tap in place with a clean rubber mallet.
e. Install screw (9) located under arm rest pad (10).
Check that all the trim retainers are
securely fastened and are not damaged.
f. Install screw (8) at door handle cover plate.
Replace any damaged fasteners.
g. Install arm rest (10) to the door with the two
attaching screws (5).
a. Pull door inside handle (12) inward.
h. Install four screws (3) securing lower edge of
b. Position trim assembly (4) to inner panel (13),
trim panel (4).
inserting door handle (12) through handle hole
in panel (4).
i. Install the door lock knob (2).
Fasten panel (4) onto door side window seal
j. Install the window regulator handle (1) with the
clip remover tool.
4-177. INNER WINDOW WEATHER-STRIP REPLACEMENT.
This task covers:
General Mechanics Tool Kit
Trim Panel Removed
General Safety Instructions
Transmission in (N) neutral.
Parking brake and micro-brakelock set.