4-50. REAR BACK-UP, TURN AND STOP LIGHT MAINTENANCE
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Back-Up Light (411SC)
a. Snap out the lens retaining spring (1).
b. Remove the lens (2).
c. Remove three retaining ring screws (3) and ring
d. Remove the lamp housing assembly.
e. Disconnect wiring harness from the lamp
a. Remove bulb by pressing down and twisting
b. Install bulb by pressing down and twisting
d. Insert lens (2) into assembly and snap the
retaining spring (1) into place.
a. Connect the wiring harness to the lamp housing
e. Reconnect battery cables.
b. Position the lamp housing assembly in the rear
c. Install the three retaining ring screws (3) through
the ring (4) into the assembly.