REAR WARNING LIGHT REPLACEMENT

TM 5-4210-224-14&P

4-48. HOSE BED PICK-UP LIGHTS AND MOUNTING BRACKETS MAINTENANCE (Continued).

c. Position and install two screws (1), washers (2),

and nuts (3) securing light mounting brackets (4)

to each side end panel (6).

d. Install handrails (paragraph 444).

e. Reconnect battery cables.

4-49. REAR WARNING LIGHT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General Safety Instructions

General Mechanics Tool Kit

Engine OFF

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

Materials/Parts

Batteries disconnected.

Warning Light (CE-600-1R)

REMOVAL

a. Remove four screws (1) securing lens (2) to

light assembly.

b. Remove three screws (3) securing rear warning

light assembly (4) to vehicle.

c. Remove outer sealing gasket (5).

d. Open rear compartment door (6) and disconnect

wiring from warning light assembly (4).

e. Remove warning light assembly (4).

INSTALLATION

c. Install outer panel (7) and gasket (5) with three

screws (3) securing the light assembly (4) to the

vehicle.

a. Open rear compartment door (6) and position

warning light assembly (4) to opening.

d. Position rear warning light lens (2) and secure to

assembly with four screws (1).

b. Connect wires to warning light assembly (4).

e. Reconnect battery cables.

4-82