ENGINE - Continued
Remove and plug the lubrication feed line (11) from the top of the turbocharger. Remove the fasteners
retaining the support clamp (12). Position the lubrication line so that it does not interfere with
Loosen and remove clamp (13). Slide clamp down on connector hose (14).
Remove the two capscrews (15) and lockwashers (16) that retain the turbocharger to the air inlet
Carefully lift the turbocharger assembly from engine compartment. Plug air inlet hose (14).
Remove and discard the seal ring (23). Plug lubrication port in housing (24).
(10) Remove locknuts (18) and washers (19), and separate the turbocharger turbine housing (6) from the
exhaust inlet adapter tee (22).
(11) Remove and discard gasket (20).
(12) Examine studs (21) for corrosion or stripped threads. Replace studs as necessary. Clean all gasket
material from turbocharger turbine housing (6) and adapter (22) mating surfaces. Carefully check
exhaust inlet adapter tee for cracks or any other damage that may cause an 3-93 exhaust leak.
Replace inlet adapter tee as necessary.