4-24. ELECTRICAL SYSTEM - Continued
Install washer (4) and nut (3). Tighten
Install new knob (2) and tighten screw (1)
Reconnect wires as noted in step 2
Fold back panel and install retaining
Ignition Switch Replacement.
This switch is similar to panel lamp switch
in construction except activating knob is
secured with an axial screw.
To replace, carry out procedures detailed
in e preceding
Start Push button Replacement.
Hinge up the fold-down panel as detailed
in para. 4-24.4 paragraph c.
Tag and disconnect wires from the failed
From back of panel, loosen clamping nut
Unscrew pushbutton (1) from front of
panel. Remove and discard the switch.
Install new switch through hole in panel.
Screw on the pushbutton (1).
Tighten clamping nut (3) securely.
Reconnect wires as tagged in step 2