|
| |
TM 5-4210-220-12
4-12. CAB - Continued
(6)
Inspect all parts for wear and corrosion. Clean corroded parts. Replace if defective.
NOTE
If the gear on handle (5) or the gear (13) has defective teeth, replace complete handle and
housing assembly.
(7)
Install toggle (10) and screw (11) in switch (12).
(8)
Be sure gear (13) is properly located in housing (6) and install switch (11) and switch cap (9) Attach
switch cap using screws (8).
(9)
Install screw (7).
(10)
Lubricate gear on handle (5) using white grease (Item 34, Appendix E.) Install handle to housing (6)
using wedge (2) and screw (3).
(11)
Install handle assembly to shaft (4) and connect wiring as detailed in steps 5 thru 7 of INSTALLATION
preceding.
4-93
|
