(2) Problem .Determine the inspection
B-1. Purpose. The purpose of this special instruction is
to provide the storage inspection frequency for each
stock numbered item covered by this bulletin.
(a) Refer to table B-1.
(b) The level of protection has been given as
This is shown on the table as PC B
a. The inspection frequency for given storage
(Preservation code B).
environments and given levels of protection is shown in
(c) The storage environment has been given
The levels of protection and storage
as an unheated warehouse. From paragraph 2-6f of this
environments cited in the table are required to set the
bulletin, an unheated warehouse storage environment is
designated Code B. This storage environment is shown
b. Abbreviations used in the table are as follows:
on Table B-1 as TSC B (Type Storage Code B).
IFC-Inspection Frequency Code
(d) The intersection of the Storage
Environment Line TSC B, and the Level of Protection
TSC-Type Storage Code
Column PC B, is at ICF 3.
c. Codes used in the tables are defined in section II,
(e) IFC 3 indicates that the subject component,
paragraph 2-6, of this bulletin.
stored and packaged as indicated above, should be
d. An example of the use of the table follows:
inspected every 24 months.
(1) Given. A quantity of a stock numbered
e. If the IFC as determined by the above procedure
subject item listed in appendix A has been provided
disagrees with the IFC in appendix A, then the more
Level B, intermediate military protection, and is stored in
frequent IFC will be used if the PC is B or C.
an unheated warehouse space.