|
| |
TM 9-254
3-23.
Level Assembly and Cover Assembly Leakage Test - Continued
KEY to figure 3-50:
1.
Container of clear water
3.
Fabricated leak test adapter
2.
Cover assembly
4.
Lamp shell
Figure 3-50. Leak Testing Cover Assembly
(11) Remove four wing nuts (5), four machine screws (3), and cover assembly (9) from fabricated leak test
adapter (4).
(12) If air bubbles were detected, repair cover assembly as required and repeat the cover assembly leakage
test.
(13) If air bubbles were not detected, use a clean, dry cloth to dry cover assembly.
3-54
|
