|
| |
TM 9-254
3-13.
Using Expendables - Continued
Figure 3-40. Applying Sealing Compound to a Setscrew
(13) Insert sealing gun into hole (2) and fill internal groove until sealing compound comes out hole (4). Install
setscrew (3) into hole (2) and remove setscrew (6).
(14) Insert sealing gun into hole (4) and fill internal groove until sealing compound comes out hole (1). Install
setscrew (5) and (6). Figure 3-41. Sealing Internal Groove
Figure 3-41. Sealing Internal Groove
f.
Silicone Heat Sink Compound (fig. 3-42). Insulating compound acts as a heat conductor to dissipate heat
generated by the electrical components and as an electrical insulator. A general procedure for the application of a silicone
type insulating compound is described below:
3-39
|
