|
| |
TM 9-254
6-5.
Harness Lacing - Continued
c.
Finishing Square Knot (fig. 6-5). The finishing knot should be a typical finishing square knot although the
lacing frequently will finish off on one wire rather than on the body of the harness as shown.
Figure 6-5. Finishing Square Knot
d.
Spot Ties (fig. 6-6). Use a clove hitch for spot ties on cable harness where continuous lacing is not desired.
The applicable wiring harness diagram will specify the type of lacing stitch and stitch spacing for the harness.
Figure 6-6. Clove Hitch Spot Tie
6-4
|
