 |
|||
|
|
|||
|
Page Title:
Boresight Adjustment Inspection |
|
||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0082 00
TEST AND INSPECTION - Continued
Boresight Adjustment Inspection
1
3
2
1 fc 5 5 8
Turn boresight screw (1) on bracket assembly (2) and observe shaft (3). When boresight screw is turned,
shaft should also turn.
Torque Inspection
2
2
3
4
7
1
1
1 fc 5 5 9
6
5
3
1 fc 5 6 0
1.
Place torque wrench adapter (1) on torque wrench (2).
2.
Place torque wrench adapter (1) and torque wrench (2) over cross level knob (3).
3.
Measure torque.
4.
Torque required to start cross level knob (3) moving (starting torque) must not exceed 18 in.-lb
(2.03 N-m).
5.
Torque required to keep cross level knob (3) turning (running torque) must be between 4 in.-lb
(0.45 N-m) and 12 in.-lb (1.35 N-m).
0082 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals