 |
|||
|
|
|||
|
Page Title:
Setting Up and Adjusting the Cross-Leveling Fixture - continued |
|
||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0073 00
TEST AND INSPECTION - Continued
Setting Up and Adjusting the Cross-Leveling Fixture - Continued
1
30
34
36
29
1 fc 4 2 7
33.
Return cross-leveling fixture (1) to zero elevation and securely tighten inspection aid support assembly
(29) to elevation shaft (30).
34.
Turn knob (36) on inspection aid support assembly (29) to either limit stop; back off approximately 7-
3/4 turns. Level bubble (34) of inspection aid support assembly should be in approximate center of
level vial.
35.
Ensure all mounting surfaces are level and adjusted correctly by visually inspecting mount mating
surfaces.
Visual Inspection
1.
Check that all screws and lockwashers are present and tight.
2.
Check that lock wire is secure.
2
4
1
3
1 fc 4 2 8
0073 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals