 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0047 00
DISASSEMBLY - Continued
12
12
11
11
10
10
9
8
9
5
8
4
5
3
7
4
2
1
3
6
7
2
1
6
1 fc 0 7 2
1 fc 0 7 1
M17A1 Quadrant
M18A1 Quadrant
1.
Remove machine screw (1), lockwasher (2), cap and retainer assembly (3), and two batteries (4) from
battery enclosure assembly (5). Discard lockwasher.
2.
Remove four machine screws (6) and four lockwashers (7). Discard lockwashers.
CAUTION
Use extreme care when removing battery enclosure assembly. A short wire harness
and connector on battery enclosure assembly are connected to a connector on a short
wire harness that passes through adapter plate on quadrant assembly. These
connectors and wire harnesses are easily damaged.
3.
Carefully disconnect connector (8) from connector (9) and remove battery enclosure assembly (5).
CAUTION
Do not attempt to remove adapter plate between battery enclosure assembly and
cover assembly. The wire harness passing through adapter plate cannot be removed
without damaging the equipment. The adapter plate can only be removed or
installed by the manufacturer.
4.
Remove gasket (10) from adapter plate (11) on quadrant (12). Discard gasket.
0047 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals