 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-1925-292-14&P
0042 00
3
5
6
3
4
4
7
7
6
5
1
2
Figure 1. Simplex Strainer Replacement
WARNING
The simplex strainer is very heavy. Use a chain hoist to remove the strainer.
Failure to comply with this warning can result in serious injury to personnel and
damage to equipment.
6. Remove the strainer assembly (figure 1, item 1).
7. Remove and discard the gaskets (figure 1, item 6).
ASSEMBLY
1. Thoroughly clean old gasket material from each of the flanges (figure 1, item 5).
2. Position the new strainer assembly (figure 1, item 1) to the piping (figure 1, item 7) with the new gaskets
(figure 1, item 6) and loosely secure with the eight bolts (figure 1, item 4) and eight nuts (figure 1, item 3) for
each flange (figure 1, item 5).
3. Tighten the eight bolts (figure 1, item 4) on each flange (figure 1, item 5).
4. Remove the lockouts and tagouts (FM 55-502).
5. Operate the diesel-engine driven firefighting pump (WP 0005 00) and observe that the system operates
normally without leakage or unusual noises.
6. Return the equipment to the desired readiness condition.
END OF WORK PACKAGE
0042 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals