|
|
TM 55-1925-292-14&P
0020 00
WARNING
Do not allow general lubricating oil to come in contact with unprotected skin or
eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause
serious injury. Always wear chemical protective gloves and goggles when han-
dling lubricating oil. Failure to follow these precautions can result in illness or
serious injury.
5. Visually observe that the outboard bearing (or the bearing cage) is sufficiently lubricated. Ensure that the
bearing and/or bearing cage is lubricated once a month in daily service or equivalent in intermediate service.
Perform the following steps if the bearings require lubrication:
a. Ensure that the fitting (figure 1, item 1) is properly cleaned per above instructions.
b. Apply two or three shots of grease to the grease fitting (figure 1, item 1) using the lubricating gun.
c.
Clean the surrounding area as necessary following greasing with clean wiping rags.
6. Perform the Follow-On Service procedure at the end of this work package.
1
Figure 1. AFFF Pump
0020 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |