|
|
TM 55-1905-243-24&P
1. GENERAL INFORMATION FOR FM-200 FIREFIGHTING SYSTEM
1.1 DESCRIPTION OF FM-200. FM-200 (1,1,1,2,3,3,3) - Heptafluoropropane is a compound of Carbon, Fluorine,
and Hydrogen (CF3CHFCF3). It is colorless, odorless, and electrically non-conductive. It suppresses fire by a
combination of chemical and physical mechanisms without affecting the available Oxygen. FM-200 is clean, leaves
no residue, thereby eliminating costly after-fire clean-up, and keeping "down time" to a minimum. FM-200 is stored
in steel containers, at 360 PSIG, 70F (25 bars at 21C), as a liquid, with Nitrogen added to improve the discharge
characteristics. When discharged, the FM-200 liquid vaporizes at the discharge nozzles and is uniformly
distributed as it enters the fire area. FM-200 is approved for total flooding fire extinguishing applications in
occupied spaces by the Environmental Protection Agency (EPA) and appears on the Significant New Alternatives
Policy (SNAP) list of acceptable substitutes for ozone depleting substances. FM-200 is also on the clean
halocarbon fire extinguishing agents listed in the National Fire Protection Agency (NFPA) 2001 Standard, Clean
Agent Fire Extinguishing Systems and is approved for marine application by the US Coast Guard (USCG).
1.2
INSTALLATION REQUIREMENTS. The FM-200 systems have been installed in accordance with the
approved Technical Data Package (TDP) consisting of the Detailed Design/Installation Drawings.
1.3 VESSEL SPECIFIC DESIGN CONFIGURATIONS. Due to differences in vessel configuration within the LCU-
2000 Design, minor configuration changes to the Detailed Design/Installation Drawings were made during each
installation to accommodate the configuration of each vessel. The Detailed Design/Installation Drawings have
been revised to fully disclose the LCU-2K class configuration of the FM-200 systems installed on your vessel.
LCU-2K-5553-1, US Army LCU-2K FM-200 System Piping Installation and Details; LCU-2K-5553-2, US Army LCU-
2K FM-200 System Miscellaneous Mods; LCU-2K-5553-3, US Army LCU-2K FM-200 System Electrical
Modifications; and LCU-2K-5553-4, US Army LCU-2K FM-200 System Label Plates and Placards; are specific to
your vessel and disclose the LCU-2K class configuration of the installed FM-200 systems. These drawings are
provided as follows:
DRAWING TITLE
DRAWING NUMBER
LOCATION
US Army LCU-2K
FM-200 System Piping Installation and Details
LCU-2K-5553-1
US Army LCU-2K
FM-200 System Miscellaneous Mods
LCU-2K-5553-2
US Army LCU-2K
FM-200 System Electrical Modifications
LCU-2K-5553-3
US Army LCU-2K
FM-200 System Label Plates and Placards
LCU-2K-5553-4
NOTE
LCU-2K CLASS DIFFERENCES IN VESSEL CONFIGURATION EXIST WITHIN THE
LCU 2000 DESIGN. ACTUAL LOCATION OF SOME COMPONENTS MAY VARY
SLIGHTLY BETWEEN VESSELS.
LCU-2K consists of five (5) manually actuated systems.
1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |