DRAFT
TM 5-4210-249-13&P-3
0458
INSTALLATION
NOTE
Install wire harness as noted prior to removal.
Install cushion clips, split looms, and cable ties as noted.
1.
Install pump house wire harness (93) in vehicle.
2.
Install wire 1817 (91) on exhaust fan control (92) with nut (89) and lockwasher (90).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
3.
Apply sealing compound to electrical connection on exhaust fan control (92).
4.
Connect pre-heat control relay (88) to glow plug relay connector (87).
5.
Install retaining clip (86) on pre-heat control relay (88) and glow plug relay connector (87).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03276
6.
Connect pump start connector (84) to pump engine connector (85).
0458-11
