DRAFT
TM 5-4210-249-13&P-3
0455
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03367
50. Remove main wire harness (128) from vehicle.
END OF TASK
INSTALLATION
NOTE
Route main wire harness on vehicle as noted prior to removal.
Install cushion clips, split loom, and cable ties as noted.
1.
Install main wire harness (128) on vehicle.
2.
Install guard (123) on vehicle with two screws (127), washers (126), lockwashers (125), and nuts (124).
3.
Install guard (122) on guard (123) with two screws (121) and locknuts (120).
4.
Connect main wire harness connector (118) on shoreline receptacle auto eject connector (119).
5.
Connect main wire harness connector (116) on crew cab wire harness connector (117).
0455-19