DRAFT
TM 5-4210-249-13&P-3
0436
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03076
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of body condenser wire harness prior to removal to ensure proper
installation.
Note position and remove cable ties, split looms, and cushion clips as required.
B+ stud is located on frame rail crossmember under vehicle.
1.
Remove nut (1), lockwasher (2), and wire 1138 (3) from B+ stud (4). Discard lockwasher.
NOTE
Ground stud is located on driver side frame rail.
2.
Remove nut (5), lockwasher (6), and wire 1640 (7) from ground stud (8). Discard lockwasher.
0436-2