DRAFT
TM 5-4210-249-13&P-2
0250
6.
Remove two screws (14), gasket (15), and oil return line (16) from turbocharger (3).
7.
Remove four nuts (17), gasket (18), and turbocharger (3) from water pump engine (19).
8.
Remove four screws (20), gasket (21), and turbocharger outlet (22) from turbocharger (3).
END OF TASK
INSTALLATION
1.
Install gasket (21) and turbocharger outlet (22) on turbocharger (3) with four screws (20).
2.
Install gasket (18) and turbocharger (3) on water pump engine (19) with four nuts (17).
3.
Install gasket (15) and oil return line (16) on turbocharger (3) with two screws (14).
CAUTION
Lubricating oil must be poured into oil supply line opening to lubricate
turbocharger bearings prior to installing oil supply line on turbocharger. Failure to
comply may result in damage to equipment.
4.
Pour lubricating oil into oil supply line (13) opening.
NOTE
Install preformed packings as noted prior to removal.
5.
Install two preformed packings (12) and oil supply line (13) on turbocharger (3) with screw (11).
6.
Install pipe (10) on turbocharger (3) with clamp (9).
7.
Install union (8) on turbocharger (3) with clamp (7).
8.
Install elbow (5) on duct (6) with clamp (4).
0250-3
