DRAFT
TM 5-4210-249-13&P-2
0200
INSTALLATION
1.
Install set screw through access hole in blower.
Both end covers, blowers, and blower housings are installed the same way.
Ensure blowers can rotate without interference after installing blowers and end cover.
Install cable ties as required.
2.
Install blower housing (22) on blower motor (26) with two nuts (25).
3.
Install blower (24) on blower motor housing (22) with set screw (23).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01961
4.
Install end cover (21) on blower housing (22) with three screws (20).
0200-5
