DRAFT
TM 5-4210-249-13&P-2
0180
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03841
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 4.
Remove SHORELINE INLET receptacle from bracket (WP 0425). Remove four screws
from SHORELINE INLET receptacle. Remove backplate from SHORELINE INLET
receptacle. Disconnect SHORELINE INLET receptacle 24 VDC solenoid connectors.
While an assistant puts ENGINE switch to START position (TM 9-2320-347-10), check
for 22 to 28 VDC between SHORELINE INLET receptacle solenoid from terminal
connector to terminal connector while engine is being cranked.
a.
If 22 to 28 VDC are present, replace SHORELINE INLET
receptacle (WP 0425).
b.
If 22 to 28 VDC are not present, repair wires from SHORELINE INLET
receptacle to HEMTT starter if repairable (TM 9-2320-325-14&P), or
replace SHORELINE INLET receptacle (WP 0425).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0180-5/(6 blank)
