DRAFT
TM 5-4210-249-13&P-2
0153
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02583
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 10.
Connect main wire harness crew cab wire harness connector. Cut crew cab wire
harness overhead warning beacon wire 1630 (green) at butt splice connector. Check
for 22 to 28 VDC between crew cab wire harness wire 1630 (green) at crew cab wire
harness overhead warning beacon butt splice connector termination and a known good
ground.
If 22 to 28 VDC are not present, repair wire 1630 in crew cab wire harness if
repairable (TM 9-2320-325-14&P), or replace crew cab wire
harness (WP 0446).
0153-10
