DRAFT
TM 5-4210-249-13&P-2
0130
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02967
Step 35.
Connect main wire harness driver side body wire harness connector. Remove skid
plate grille (WP 0550). Disconnect main wire harness main 3 wire harness connector.
Check if DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator flashes.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash, go to Step 38.
TFFT02968
Step 36.
Connect main wire harness main 3 connector. Remove cab instrument panel
A (WP 0311). Remove diode pack (WP 0399). Turn battery disconnect switch to ON
position (WP 0007). Check if DO NOT MOVE APPARATUS WHEN LIGHT IS ON
indicator flashes.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash, repair wire 1609 in cab power distribution wire harness if repairable
(TM 9-2320-325-14&P), or replace cab power distribution wire harness and
block (WP 0441).
0130-26