DRAFT
TM 5-4210-249-13&P-2
0126
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02537
Step 19.
Turn battery disconnect switch to OFF position (WP 0007). Disconnect cab instrument
panel wire harness cab power distribution wire harness connector. Turn battery
disconnect switch to ON position (WP 0007). With a test lead set, check for 22 to 28
VDC between cab instrument panel wire harness wire H052 (white) at cab instrument
panel wire harness connector, terminal 17 and a known good ground.
a.
If 22 to 28 VDC are present, repair wire H052 in cab power distribution
wire harness if repairable (TM 9-2320-325-14&P), or replace cab
power distribution wire harness and block (WP 0441).
b.
If 22 to 28 VDC are not present, repair wire H052 in cab instrument
panel wire harness if repairable (TM 9-2320-325-14&P), or replace
cab instrument panel wire harness (WP 0440).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install personnel cab instrument panels A, B, and C if removed (WP 0311)
2.
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0126-14