DRAFT
TM 5-4210-249-13&P-1
0085
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03907
Step 3.
Remove pump house panel S (WP 0540). Check for 22 to 28 VDC between high
amperage cable 1413766 (red) from glow plug control relay, terminal to a known good
ground.
If 22 to 28 VDC are present, go to Step 6.
TFFT03908
Step 4.
Turn battery disconnect switch to OFF position (WP 0007). Check for continuity across
glow plug control relay circuit breaker from terminal to terminal.
If there is no continuity across circuit breaker, replace glow plug control relay
circuit breaker (WP 0391).
0085-4