DRAFT
TM 5-4210-249-13&P-1
0011
STOW EQUIPMENT (LADDER) RACK
TFFT00571P
NOTE
Line up arrows with supporting beam.
Equipment (ladder) rack will operate in SERV. DRIVE mode with ENGINE switch in OFF
position.
1.
Install 10 ft. (3 m) folding ladder (13) on equipment (ladder) rack (6) with pin (12).
2.
Install 24 ft. (7 m) two-section ladder (11), 14 ft. (4 m) roof ladder (10) on equipment (ladder) rack (6) by pulling
two securing handles (9) straight out and turning 1/4 turn up.
3.
Install vehicle maintenance ladder (8) on vehicle with two buckle straps (7).
4.
Put MASTER SWITCH (3) to ON position. Indicator light (4) will illuminate.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 10
Stay clear of equipment (ladder) rack area unless equipment (ladder) rack is locked
in raised position or in fully lowered position with MASTER SWITCH OFF. Sudden
equipment (ladder) rack movement may cause injury or death to personnel.
CAUTION
Ensure ladders are clear of crew cab. Ladder could contact crew cab causing
damage to equipment.
5.
Clear rack area and push LIFT SWITCH (5) up to raise equipment (ladder) rack (6).
6.
Put MASTER SWITCH (3) to OFF position. Indicator light (4) will go out.
END OF TASK
END OF WORK PACKAGE
0011-2
