|
| |
TM 5-4210-233-14&P-1
5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued
(8) Remove nut (10) attaching output yoke (11 ) to carrier. Use a suitable puller and remove the output
yoke.
(9) Install cage and seal assembly (4) in a vise with soft jaws.
(10) Pry under the flange of the oil seal (12) and remove oil seal (12) from output bearing cage (13).
Discard oil seal.
(11) Remove retaining ring (14) from output cage assembly (13). Discard retaining ring. Remove spacer
rings (15) from output shaft (16).
5-290
|
